search

Rosemount 848T Especificaciones Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 18
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
Quick Start Guide
7
December 2014
6. To connect the power module, remove the plastic plug from the receptacle.
A. Plastic Plug
7. After initial installation, close the housing cover securely. Always ensure a
proper seal by installing the electronics housing cover so that metal touches
metal, but do not over tighten.
8. Position the antenna vertically. The antenna should be approximately three
feet (1 m) from any large structures or buildings to allow clear communication
to other devices.
Installing the optional voltage adapter
The Rosemount 848T Wireless voltage adapter allows voltage measurement from
0-10 volts. Each adapter accommodates 2 voltage inputs, and can be installed
interchangeably on inputs 1 & 2 or 3 & 4.
To install voltage adapter:
1. Open terminal screws 2 and 3 on BOTH inputs. Note that the screws are
captive and should NOT be completely removed by using excess force.
A
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Comentarios a estos manuales

Sin comentarios
  • AFi Dittel Argee K2 Bike Sbc-comm
  • Blaupunkt Cd radios Leica Bombas De Agua Aluratek Accesorios De Panel Plano Ronco Fabricantes De Jugos Jenn-Air El Calentamiento Cajones
  • Samsung HMX-R10SN Yamaha AX10 Samsung S24C370HL Audioengine A2+ POWERED DESKTOP SPEAKERS
  • Philips SMARTSPOT Manual de usuario Audio Note M3 RIAA Especificaciones Kodak Z5010 Manual de usuario Da-Lite 34464LS Ficha de datos Samsung D103 Manual de usuario